The Bolt® Mini Blot Module Gasket is a replacement part for the Bolt® Mini Blot Module. The gasket fits on the cathode core (-) of the blot module. About the Bolt® Mini Blot Module The Bolt® Mini Blot Module is a wet transfer device used exclusively with the Bolt® Mini Gel Tank. The tank accommodates one blot module per chamber, or two blot modules total with the side-by-side layout. The Bolt® Mini Blot Module is compatible with Bolt® Bis-Tris Plus gels and accommodates one gel per wet transfer. The universal connection and molded gasket make the blot module easy to use, while the inner core o...
Size: 1 unit
Replacement Parts for Electrophoresis Apparatus
Size: 1 each
Invitrogen makes blotting of E-PAGE™ Gels easier and more efficient by providing a pre-cut fiber blotting pad and several types of pre-cut, pre-assembled membrane/filter paper sandwiches that perfectly fit 8.6 cm x 13.5 cm E-PAGE™ Gels*. The available nitrocellulose and Invitrolon™ PVDF membranes are designed for western transfer of proteins (Figure 1, Table 1). Pre-cut, extra-thick, absorbent Blotting Paper (2.5 mm thickness) for E-PAGE" Gels are also available to accommodate the E-PAGE™ blotting set-up using a semi-dry transfer apparatus. A protein s properties affect its ability to bind to ...
Size: 4 pads
The Blotting Roller is an 8.6 cm wide roller designed for easy and efficient removal of bubbles when assembling gel/membrane sandwiches for blotting both E-PAGE™ Gels and mini-gels such as NuPAGE® and Novex¤ Tris-Glycine Gels. It consists of a Delrin roller attached to a stainless steel handle. The Incubation Tray enables convenient and even staining of E-PAGE™ blots. The tray is 10 cm (l) x 14 cm (w) x 3 cm (d) with a lid. It is suitable for use with immunodetection or blot stains.
Size: 1 unit
The Blotting Tweezer is a replacement part for the Bolt™ Mini Blot Module. It is for general use of handling nitrocellulose or PVDF membranes. About the Bolt™ Mini Blot Module The Bolt™ Mini Blot Module is a wet transfer device used exclusively with the Bolt™ Mini Gel Tank. The tank accommodates one blot module per chamber, or two blot modules total with the side-by-side layout. The Bolt™ Mini Blot Module is compatible with Bolt™ Bis-Tris Plus gels and accommodates one gel per wet transfer. The universal connection and molded gasket make the blot module easy to use, while the inner core of the...
Size: 1 unit
DryEase® Mini-Gel Cellophane is one component of the DryEase® Mini-Gel Drying System , which is a simple, easy-to-use kit for drying gels evenly using passive evaporation. The kit allows gels to be assembled on a base between two open frames, so that both outer surfaces of the gels are exposed to air. Consequently, drying is even and cracking is minimized. The proprietary Gel-Dry™ Drying Solution modulates the rate of water release to ensure crack-free gels. With the DryEase® System, gels are dried overnight with uniform tension on all points of the gel to eliminate cracking. Applications: Gel...