These 2 buffers are to be used only as a complement to the SuperScript® III Platinum® CellsDirect Kits when large number of samples are processed. See manual of SuperScript® III Platinum® CellsDirect Kits for protocol recommendations.
Size: 1 kit
The same lysis buffer found in the Ambion® Cells-to-Signal™ Kit. Supplied in 5 bottles containing 10 mL each.
Size: 5 bottle
NP40 Cell Lysis Buffer is suitable for the preparation of cell extracts to be analyzed by Antibody Bead Immunoassay (Luminex), ELISA, and Western blotting.
Size: 100 mL
Lysis Buffer, FS is designed specifically to lyse microbial organisms from food and environmental samples and prepare the microbial DNA for subsequent downstream analysis by real-time PCR. This lysis buffer can be used in conjunction with Proteinase K , FS in the Pathatrix® Auto Instrument or RapidFinder™ Direct Lysis workflows. When used as a part of the Pathatrix® Auto Instrument workflow, one bottle of Lysis Buffer, FS is sufficient for 700 reactions. When used as a part of the RapidFinder™ Direct Lysis workflow, one bottle of Lysis Buffer, FS is sufficient for 100 reactions.
Size: 7 mL
UltraPure™ DNA Typing Grade® 50X TAE Buffer is a sterile-filtered solution of 2 M Tris-acetate and 50 mM EDTA. TAE Buffer is the most commonly used buffer for agarose DNA electrophoresis. To prepare a 1X solution, mix one volume of UltraPure™ 50X TAE Buffer with 49 volumes of distilled water. A 1X TAE Buffer solution contains 40 mM Tris-acetate and 1 mM EDTA with a pH of 8.3 at 23“C. Performance and Quality Testing: No DNase activity detected.
Size: 1 L
Taq DNA Polymerase PCR Buffer is a 10X buffer [200 mM Tris HCl (pH 8.4), 500 mM KCl] supplied with 1 ml of 50 mM MgCl 2 . It is included with Platinum® Taq, Taq, and the SuperScript® First-Strand Synthesis System for RT-PCR.
Size: 2 x 1 mL
Cell extraction buffer suitable for use in ELISA and Western blotting.
Size: 100 mL
A 1–2X solution of 95% Formamide, 18 mM EDTA, and 0.025% SDS, Xylene Cyanol, and Bromophenol Blue. Supplied in one 1.4 mL tube. All Ambion® Gel Loading Solutions are rigorously tested for non-specific endonuclease activity, exonuclease activity, RNase activity, and for functionality. These are the same solutions we use in-house and in our kits.
Size: 1 mL
The TrackIt™ Loading Buffers are a 6X solution used for easy loading and tracking of DNA samples in agarose gels. These loading buffers contain two tracking dyes, one that runs behind the sample and one that runs ahead of the sample. The tracking dyes serve as visual markers for following migration during electrophoresis and indicate when maximum resolution of the DNA fragments has been achieved. Additionally, visualization of DNA bands will not be obscured by the tracking dyes because they run outside the limits of most DNA samples. TrackIt™ Cyan/Orange Loading Buffer is recommended for DNA f...
Size: 3 x 0.5 mL
BlueJuice™ Gel Loading Buffer (10X) is designed for easy loading and tracking of DNA samples in agarose or native polyacrylamide gels. Product use The recommended concentration of this buffer for use with all DNA samples run on agarose gels is 2X (one part buffer plus four parts sample). For acrylamide gels, the recommended concentration is 1X (one part buffer plus nine parts sample).
Size: 3 x 1 mL
ACK (Ammonium-Chloride-Potassium) Lysing Buffer is used for the lysis of red blood cells in samples containing white blood cells, such as EDTA-treated whole blood, buffy coats, and bone marrow. The complete formulation and lysis protocol are available in our Technical Reference Library. cGMP manufacturing and quality system ACK Lysing Buffer is manufactured at a cGMP-compliant facility located in Grand Island, New York. The facility is registered with the FDA as a medical device manufacturer and is certified to ISO 13485 standards.
Size: 100 mL
Denaturing polyacrylamide TBE-Urea Gels resolve single-stranded DNA oligos or RNA into sharp, distinct bands. Novex® TBE-Urea Gels are optimized for the analysis and purification of products ranging from 20-800 bases, making them an ideal choice for synthetic oligo analysis and purification, RNase Protection Assays (RPA), in vitro transcription studies, and Northern blot analysis. Novex® TBE-Urea Gels are designed to run on the XCell SureLock ™ Mini-Cell. Formulation: Novex® TBE-Urea Gels are made with high-purity reagents, including tris base, boric acid, EDTA, acrylamide, bisacrylamide, TEME...
Size: 10 mL
Novex® TBE Gels provide the highest resolution possible for analyzing restriction digests and PCR products. DNA fragments ranging from 10 to 3,000 base pairs are clearly resolved into sharp, tight bands. Novex® DNA Retardation gels are prepared with 0.5X TBE as the gel buffer. This is sufficient for good electrophoretic separation, yet low enough to promote DNA-protein interactions. Novex® TBE and DNA Retardation Gels are designed to run on the XCell SureLock ™ Mini-Cell. Formulation: Novex® TBE and DNA Retardation Gels are manufactured with high-purity tris base, boric acid, EDTA, acrylamide,...
Size: 10 mL
The DNA Extract All Reagents Kit provides PCR-ready DNA from a wide variety of sample types, ranging from blood to buccal swabs to plant tissues in 5 minutes. Simply mix your sample with the DNA lysis solution provided. Incubate for 3 minutes and add the DNA stabilizing solution, also provided. After extraction, robust PCR amplification can be completed using TaqMan® GTXpress™ Master Mix or TaqMan® OpenArray® Genotyping Master Mix (pre-amplified sample only), depending on your application. PCR can be performed using either Fast or Standard mode thermal cycling conditions. The DNA Extract All R...
Size: 200 mL
For the preparation and running of agarose gels. For use with RNA denatured by glyoxal treatment; one bottle containing 1 L is provided. Ambion® NorthernMax® reagents are the same components included in the NorthernMax® Ultrasensitive Northern Blotting Kits but in larger sizes. These reagents are supplied ready to use and are certified RNase-free. Comprehensive instructions are included.
Size: 1 L
DNA Grade Agarose has a high sieve capacity, providing optimal resolution of DNA during gel electrophoresis. The low sulfur content allows gels to be run faster without becoming brittle. Supplied as a powder that is reconstituted in 0.5X TBE for high-quality agarose gels.
Size: 500 g
An improved formula for preparing denaturing formaldehyde/MOPS agarose gels. Formaldehyde is included. Gels made with this buffer are considerably less brittle than conventional formaldehyde gels, making handling of the gels much easier. One bottle containing 250 mL is provided. NorthernMax® reagents are the same components included in the NorthernMax® Ultrasensitive Northern Blotting Kits but in larger sizes. These reagents are supplied ready to use and are certified RNase-free. Comprehensive instructions are included.
Size: 250 mL
AmpliTaq Gold® DNA Polymerase is a chemically modified form of AmpliTaq® DNA Polymerase requiring thermal activation. Features of this enzyme: • Automated chemical hot-start enzyme for increased specificity, sensitivity, and yield • Time-released thermal activation improves sensitivity in low copy number amplifications • Successful multiplex PCR saves time and reagents • Includes GeneAmp® 10X PCR Buffer II with MgCl 2 Hot-start activation The modified enzyme is provided in an inactive state. Upon thermal activation, the modifier is permanently released, regenerating active enzyme. The resultin...
Size: 250 units
AmpliTaq® DNA Polymerase is a 94 kDa, thermostable, recombinant DNA polymerase obtained by expression of a modified form of the Thermus aquaticus ( Taq ) DNA polymerase gene in E. coli. It is the most thoroughly characterized enzyme available for the PCR process and its recombinant nature and purification method provide unparalleled purity and reproducibility, vial-to-vial, lot-to-lot. Features of this enzyme: AmpliTaq® DNA Polymerase is the most thoroughly characterized enzyme available for the PCR process, a testimony to its overall utility and efficacy Its thermal activity profile makes it ...
Size: 250 units
Molecular biology grade, Ambion® 10X TBE solution is supplied in four bottles containing 1 L each. The buffer is certified RNase-free, economical, and ready-to-use. Due to the ubiquitous presence of RNases, manufacturing products for use with RNA is especially challenging. Ambion®'s nuclease-free reagents and buffers are manufactured in facilities specifically designed to prevent the introduction of nucleases. Highly sensitive RNase assays are performed at several different stages of the manufacturing process to ensure the highest quality. These reagents are rigorously tested for contaminating...
Size: 4 x 1 L