The QuantStudio™ 3D Digital PCR UV Sealing Kit with Pen provides the materials needed to ensure an occlusive seal on the QuantStudio™ 3D Digital PCR Chip following reagent addition. This is accomplished through the application of sealant and the use of UV light to cure the sealant. This kit includes a syringe of sealant and a sealant tip, as well as a UV pen (batteries included) and pen holder. After loading sample onto the chip, apply the chip lid, add immersion fluid, and seal the fill-hole with the UV sealant and cure the sealant with the UV light pen. If you already have a UV pen and would...
Size: 1 kit
The Applied Biosystems® QuantStudio™ 3D Digital PCR Tilt Base for GeneAmp® PCR System 9700 sits beneath the GeneAmp® 9700 thermal cycler and ensures consistent performance during the PCR amplification of the QuantStudio™ 3D Digital PCR Chips. Simply place the Tilt Base beneath the feet of the thermal cycler, load your prepared 3D digital PCR chips, and begin PCR amplification.
Size: 1 base
The ProFlex™ 2x96-Well PCR System is the latest in our line of Applied Biosystems® thermal cyclers. The ProFlex™ system combines the reliability and performance you’ve come to expect from Applied Biosystems® instruments with the flexible configuration and control features that adapt to your research needs. Request a demo . The ProFlex™ 2x96-Well PCR System allows you to: • Interchange the 2x96-well, 0.2 mL block with another block type if your throughput needs change • Access the system remotely (and conveniently) through a mobile app • Program the instrument in seconds with a simple-to-use to...
Size: 1 instrument
The Midi Gel Adapter is designed for use with the Novex® Midi Gel Cassette (NuPAGE® or Tris-Glycine Gels) to perform electrophoresis using a BioRad Criterion™ Cell. The Midi Gel Adapter is also supplied with the Novex® Midi Gels with Adapters Kit.
Applied Biosystems® GeneAmp® Thin-Walled Reaction Tubes enable fast heat transfer for precise PCR in 0.5 mL PCR Systems. • Thin plastic enables fast heating and cooling for accurate results • Flat, frosted caps for easy marking • Captive lid with positive-click closure assures proper seating • Polished surface and conical bottom allow maximum sample recovery • Autoclaved tubes provide a clean, controlled start Rapid Heat Transfer The GeneAmp® Reaction Tube is made of specially engineered polypropylene and is optimized for use with the Veriti™ 60-Well Thermal Cycler and the Dual 96-Well GeneAmp...
Size: 1000 tubes