The PureLink® Viral RNA/DNA Mini Kit is a nucleic acid purification system designed for fast and easy isolation of viral RNA or DNA from cell-free samples, such as serum, plasma, and cerebrospinal fluid. Starting sample volumes can be as high as 500 µl and elution volumes as low as 10 µl, allowing for a 50-fold concentration of nucleic acids. The higher target concentration obtained using the PureLink® Viral RNA/ DNA Mini Kit provides greater sensitivity and accuracy in downstream detection procedures such as real-time PCR or endpoint analysis. Specially formulated buffers enable the purificat...
Size: 100 tubes
These RNase-free microcentrifuge tubes are marked with graduations for convenience, have flat lids for easy labeling, and have a positive seal design which prevents caps from coming open in boiling water baths. These polypropylene tubes are autoclave-safe. Each lot of tubes is certified RNase- and DNase-free. These 1.5 mL tubes are provided in a box of 500.
Size: 500 tubes
These microcentrifuge tubes have a non-stick, low-binding surface and are guaranteed RNase- and DNase-free. They have a positive seal design that withstands temperatures from -90°C to +120°C, and are marked with convenient graduations.
Size: 250 tubes
The new Gibco® bottle has its own bottle weight for keeping order in the water bath! The bottle weight fits the new 500 mL and 1 L Gibco® bottles, keeping them upright in the water to further reduce your risk of contamination. Product Use For Research Use Only. Not for use in diagnostic procedures.
Size: 1 each
MicroAmp® Cap Strips are designed to fit on MicroAmp® reaction tubes, tube strips, and 96-well plates. They are available in 8-cap and 12-cap strips in clear or an assorted set of red, orange, blue, and green. They have a domed profile and are suitable for end-point PCR. Attach caps using the MicroAmp® Cap Installing Tool. Will not interfere with sample reading Provides tight seal to minimize evaporation Easy to apply and remove Minimizes Evaporation Use MicroAmp® Caps Strips to seal the tubes containing your precious samples. This will reduce the possibility of contamination among sample well...
Size: 200 strips of assorted colors
The Applied Biosystems® MicroAmp® 96-Well Tray for VeriFlex™ Blocks is specifically designed to snugly hold MicroAmp® Fast Reaction Tubes with Caps and MicroAmp® Fast 8-Tube Strips (0.1 mL) in a 96-well format. They are also designed to snugly hold MicroAmp® Reaction Tubes with Caps (0.2 mL). Engineered for efficient sample processing Designed specifically for MicroAmp® Fast Reaction Tubes with Caps (0.1 mL) and MicroAmp® Fast 8-Tube Strips (0.1 mL) Designed specifically for MicroAmp® Reaction Tubes with Caps (0.2 mL) Manufactured to high specification, ensuring a quality product Convenience a...
Size: 10 trays
Use Applied Biosystems® MicroAmp® Adhesive Film Applicator to form a tight seal between a microplate and an adhesive film. Form a Tight Seal The MicroAmp® Adhesive Film Applicator enables you to ergonomically push an adhesive film down upon a microplate to form a tight seal and minimize air bubbles. This tight seal will prevent well-to-well contamination and sample loss. Quick and Easy Use the MicroAmp® Adhesive Film Applicator to speed the process of sealing multiple microplates. This tool is designed according to the microplate dimensions so you can quickly seal a microplate. The rugged prop...
Size: 5 applicators
The Applied Biosystems® MicroAmp® Optical Adhesive Film reduces the chance of well-to-well contamination and sample evaporation when applied to a microplate. Features: • Pressure-sensitive adhesive provides a tight seal over every well • Will not interfere with sample reading • Press-N-Seal: Align properly to the plate, then press to seal • Easy to apply-will not stick to your glove Prevent Loss of Precious Samples Use this optically-clear adhesive film to seal the samples into the wells of a microplate. This will reduce the possibility of cross-contamination between sample wells and help ensu...
Size: 25 covers
Applied Biosystems® MicroAmp® Optical Film Compression Pads are designed to support a proper thermal seal between the thermal cycler and reaction plates when using adhesive films. Note: See user's manual or package insert for limited label license, and trademark information. For Research Use Only. Not for use in diagnostics procedures.
Size: 5 each
The Applied Biosystems® MicroAmp® Fast 96-Well Tray, specifically designed to snugly hold MicroAmp® Fast Reaction Tubes with Cap (0.1 mL) and MicroAmp® Fast 8-Tube Strips, is required for more efficient sample processing on the Applied Biosystems® 9800 Fast Thermal Cycler. • Organizes your Fast Reaction Tubes or Strips • Provides the thermal contact necessary for fast PCR • Manufactured to high specification, ensuring a quality product Convenience and Performance The MicroAmp® Fast 96-Well Tray allows you to organize your tubes while adding sample and mix. This handy tray reduces spillage and ...
Size: 10 trays