Propidium iodide is a commonly used dead-cell stain that emits red fluorescence when bound to DNA. Propidium iodide is also used as a counterstain in multicolor fluorescent techniques. With Propidium Iodide ReadyProbes® Reagent, we provide a room temperature-stable solution of classic DNA stain that comes in a convenient-to-use dropper bottle. Just tip and drip two drops per ml to stain your cells. Features of Propidium Iodide ReadyProbes® Reagent: • Ready-to-use liquid propidium iodide formulation • Rapid staining of dead cells without wash steps • Ready-to-use liquid formulation in convenien...
Size: 1 kit
The LIVE/DEAD® Fixable Blue Dead Cell Stain Kit is used to determine the viability of cells prior to the fixation and permeabilization required for intracellular antibody staining or prior to elimination of biohazardous materials using formaldehyde fixation. This kit has been optimized and validated for use with a violet laser flow cytometer. • Stable—dyes are freeze dried in separate vials to maintain stability • Robust—staining pattern is the same before and after fixation • Bright signal—allows for easy distinction between live/dead cells in single channel Stable Unlike products that are so...
Size: 1 kit
ER-Tracker Blue-White DPX dye is a photostable probe that is selective for the endoplasmic reticulum (ER) in live cells. The cells can be aldehyde-fixed after staining with the dye but significant fluorescence signal will be lost. With excitation at ~374 nm, the environmentally-sensitive probe exhibits emission between 430 and 640 nm. A long-pass DAPI filter works best.
Size: 20 x 50 µL
To fit all of your expression needs, Invitrogen offers state-of-the-art Gateway® destination vectors for expression in E. coli , insect, yeast, or mammalian cells, as well as for production of native protein or N- or C-terminal fusion proteins. All Gateway® destination vectors have att R sites for recombination with any att L-flanked fragment, regardless of whether it is an entry clone or an Ultimate™ RF Clone. The following table lists the wide range of destination vectors available. Additional materials required, available separately: Gateway® entry clone, Gateway® LR Clonase® enzyme mix, an...
Size: 6 µg
Using restriction enzymes to clone your gene into an expression vector often forces you to compromise the final sequence of your insert (Figure 1A), especially when there are no useful restriction sites close to your genes coding sequence. This may result in suboptimal spacing of expression elements or incorporation of non-native amino acid residues, which can reduce your expression levels and/or cause the production of non-functional protein. In addition to being a more effective way to clone, TOPO® Cloning eliminates these potential expression problems. TOPO® Expression Vectors enable you to...
Size: 20 reactions
The pcDNA™ vectors are designed for high-level, constitutive expression in a variety of mammalian cell lines. The pcDNA3.2/V5-DEST vector offers the following key features: •Cytomegalovirus (CMV) promoter for high-level expression • att R sites for Gateway® cloning, enabling recombination with att L-flanked fragments •C-terminal V5 tag for easy detection •Neomycin resistance gene for stable selection •Ampicillin resistance gene and pUC origin for selection and maintenance in E. coli Gateway® Cloning To fit all of your expression needs, Invitrogen offers state-of-the-art Gateway® destination ve...
Size: 6 µg
The pFastBac™ Dual vector features two promoters in a single vector for expression of two proteins simultaneously in insect cells when using the Bac-to-Bac® Baculovirus Expression System (Cat. No. 10359-016). The vector has two strong promoters, the polyhedrin promoter and the p10 promoter, for high-level expression. An expression control is included that expresses both CAT and β-glucuronidase (gus).
Size: 10 µg
NucRed® Live 647 ReadyProbes® Reagent is a cell-permeant nuclear stain that emits bright, far-red fluorescence when bound to DNA. Like other ReadyProbes® reagents, NucRed® Live 647 reagent is formulated as a room temperature-stable solution and comes in a convenient dropper bottle. Just tip and drip two drops per ml to stain your cells. NucRed® Live 647 ReadyProbes® Reagent provides: • Exceptionally bright far-red fluorescence well separated from blue, green, and red fluorophores • Rapid staining of live or fixed cells without wash steps • Ready-to-use liquid formulation in convenient dropper ...
Size: 1 kit
The 293FT Cell line is ideal for generating high-titer lentivirus using the ViraPower™ Lentiviral Expression System. The 293FT Cell Line is a fast-growing, highly transfectable clonal isolate derived from human embryonal kidney cells transformed with the SV40 large T antigen. When a ViraPower™ expression vector and the ViraPower™ Lentiviral Packaging Mix are co-transfected into 293FT cells, high levels of the viral RNA and the gag⁄pol and rev proteins required for packaging are produced. Advantages • Fast growing • Highly transfectable • Produces high viral titers • Allows very high levels of ...
Size: 3 x 10
NP40 Cell Lysis Buffer is suitable for the preparation of cell extracts to be analyzed by Antibody Bead Immunoassay (Luminex), ELISA, and Western blotting.
Size: 100 mL
Intracellular calibration of the fluorescence response of cytosolic pH indicators is typically performed using the K + /H + ionophore nigericin , which causes equilibration of intracellular and extracellular pH in the presence of a depolarizing concentration of extracellular K + .
Size: 10 mg
Acid Phenol:Chloroform:IAA (125:24:1) is premixed and supplied at pH 4.5 ± 0.2. Provided in one bottle of 100 mL. In RNA extraction procedures, Acid Phenol:Chloroform:IAA aids in the removal of DNA (it partitions into the organic phase), helps to stabilize the interface, and prevents foaming when mixing. Preparation of phenol for use in molecular biology applications is a time-consuming and often hazardous procedure due to its toxic and corrosive nature. Ambion® premixed, quality tested, saturated phenols are ready-to-use, eliminating handling problems and offering a more convenient, safer, an...
Size: 100 mL
RPMI 1640 Medium was originally developed to culture human leukemic cells in suspension and as a monolayer. Roswell Park Memorial Institute (RPMI) 1640 Medium has since been found suitable for a variety of mammalian cells, including HeLa, Jurkat, MCF-7, PC12, PBMC, astrocytes, and carcinomas. Life Technologies offers a variety of RPMI 1640 Medium modifications for a range of cell culture applications. Find the right formulation using the media selector tool . This RPMI is modified as follows: With Without • L-glutamine • HEPES • Phenol Red
Size: 10 x 500 mL
High-Yield Lyse is a premixed, fixative-free erythrocyte lysing solution that can be used to eliminate red cells from whole blood for flow cytometric analysis with minimal loss of rare blood cell populations. Using this reagent, lysis of erythrocytes is performed immediately following staining of the blood samples with Invitrogen's fluorochrome-conjugated monoclonal antibodies.
Size: 500 mL
The Blotting Roller is an 8.6 cm wide roller designed for easy and efficient removal of bubbles when assembling gel/membrane sandwiches for blotting both E-PAGE™ Gels and mini-gels such as NuPAGE® and Novex¤ Tris-Glycine Gels. It consists of a Delrin roller attached to a stainless steel handle. The Incubation Tray enables convenient and even staining of E-PAGE™ blots. The tray is 10 cm (l) x 14 cm (w) x 3 cm (d) with a lid. It is suitable for use with immunodetection or blot stains.
Size: 1 unit
Gibco® Protein Free Hybridoma Medium II (PFHM II) is a serum-free, protein-free medium specifically developed for the ability to support the growth of hybridomas for antibody production. Gibco® PFHM II features: • Ability to support suspension and stationary hybridomas and myelomas • Complete, ready-to-use formulation • Serum-free, protein-free formulation Ability to support suspension and stationary hybridomas and myelomas Suitable for the culture of recombinant myeloma lines as well as traditional hybridomas, Gibco® PFHM II provides high cell densities and IgG production. Cholesterol-depende...
Size: 1 x 10 L
Opti-MEM® I Reduced-Serum Medium is an improved Minimal Essential Medium (MEM) that allows for a reduction of Fetal Bovine Serum supplementation by at least 50% with no change in growth rate or morphology. Opti-MEM® I medium is also recommended for use with cationic lipid transfection reagents, such as Lipofectamine™ reagent. Opti-MEM® I medium can be used with a variety of suspension and adherent mammalian cells, including Sp2, AE-1, CHO, BHK-21, HEK, and primary fibroblasts. Life Technologies offers a variety of Opti-MEM® I modifications for a range of cell culture applications. This Opti-ME...
Size: 500 mL
Gibco® YPD Broth is a ready-to-use liquid growth media used for yeast culture. Our filter-sterilized Gibco® YPD Broth can be used for nearly all research applications that require a liquid yeast culturing step such as protein expression, cloning, and expansion. • Gibco® microbiological media • Convenient ready-to-use liquid format • 1 L size available YPD Broth Recipe YPD Broth is a commonly used yeast growth media for maintenance and propagation of Pichia pastoris ( P. pastoris ) and Saccharomyces cerevisae ( S. cerevisae ) yeast strains. Formulation per One Liter: 10 g Yeast extract 20 g Bac...
Size: 1 L
Custom Media: EHAA Medium Click's, 500 mL
Size: 500 mL
Low density lipoprotein receptor-related protein associated protein 1 (LRPAP1), recombinant human protein is supplied as a lyophilized powder. It is suitable for use in analysis of protein structure. In general, recombinant proteins can also be used as an immunogen, as a protein standard, or in cell biology research applications. This recombinant protein was expressed from a DNA sequence encoding the human LRPAP1 (NP_002328.1) (Tyr 35-Leu 357) fused to the signal peptide at the N-terminus and a polyhistidine tag at the C-terminus. Activity: Measured by its binding ability in a functional ELISA...
Size: 5 x 5 µg