The Applied Biosystems® QuantStudio™ 3D Digital PCR Chip Adapter Kit for GeneAmp® PCR System 9700 is a required accessory for securely positioning QuantStudio™ 3D Digital PCR Chips in the dual flat blocks of the GeneAmp® 9700 thermal cycler. The Adaptor Kit includes two block adaptors, as well as two compression pads that sit atop the chips during thermal cycling.
Size: 1 kit
The Applied Biosystems® QuantStudio™ 3D Digital PCR Tilt Base for GeneAmp® PCR System 9700 sits beneath the GeneAmp® 9700 thermal cycler and ensures consistent performance during the PCR amplification of the QuantStudio™ 3D Digital PCR Chips. Simply place the Tilt Base beneath the feet of the thermal cycler, load your prepared 3D digital PCR chips, and begin PCR amplification.
Size: 1 base
The QuantStudio™ 3D Digital PCR UV Sealing Kit with Pen provides the materials needed to ensure an occlusive seal on the QuantStudio™ 3D Digital PCR Chip following reagent addition. This is accomplished through the application of sealant and the use of UV light to cure the sealant. This kit includes a syringe of sealant and a sealant tip, as well as a UV pen (batteries included) and pen holder. After loading sample onto the chip, apply the chip lid, add immersion fluid, and seal the fill-hole with the UV sealant and cure the sealant with the UV light pen. If you already have a UV pen and would...
Size: 1 kit
The Applied Biosystems® QuantStudio™ 3D Digital PCR Chip Lids and Blades are needed to securely cover and seal the QuantStudio™ 3D Digital PCR Chip after reagent addition. Simply load the reaction mix onto the chip using a blade, cover the chip with a chip lid, and seal the chip. The chip is then ready for amplification and analysis.
Size: 12 each
The QuantStudio™ 12K Flex OpenArray® Plate Press is used to align and seal the QuantStudio™ OpenArray® plate case and lid after sample loading. Once sealed, the case is filled with immersion fluid and run on the QuantStudio™ 12K Flex Real-Time PCR System.
Size: 1 system