Optical adhesive film reduces the chance of well-to-well contamination and sample evaporation when applied to a microplate. • Pressure-sensitive adhesive provides a tight seal over every well • Will not interfere with sample reading • Press-n-seal: align properly to the plate, then press to seal • Easy to apply--will not stick to your glove Prevent Loss of Precious Samples Use this optically-clear adhesive film to seal the samples into the wells of a microplate. This will reduce the possibility of cross-contamination between sample wells and help ensure consistent real-time PCR data. Easy to U...
Size: 50 covers
The Applied Biosystems® MicroAmp® Fast Optical 96-Well Reaction Plate is an integral component of the Applied Biosystems® Fast PCR Systems, which reduces PCR reaction time from 2 hours to as little as 25 minutes. • Maximum thermal conductivity for precise thermal cycling • Reproducible, specific, and sensitive PCR results in just 25 minutes • Validated with other system components for consistent results Increased Thermal Contact for Faster, More Uniform Heating The advanced design of the MicroAmp™ Fast 96-Well Reaction Plate dramatically increases its thermal contact with the Applied Biosystem...
Size: 10 plates
The Applied Biosystems® MicroAmp® Optical 384-Well Reaction Plate with Barcode is designed to provide unmatched temperature accuracy and uniformity for fast, efficient PCR amplification. This plate, constructed from a single rigid piece of polypropylene in a 384-well format, is designed to work with Applied Biosystems® 384-well Real-Time PCR systems and thermal cyclers. • Frosted to minimize interfering fluorescence from wells of cycling block • Screened to eliminate auto-fluorescent plates • Unique design provides a barrier to ambient air to help ensure well-to-well temperature uniformity • E...
Size: 500 plates
The QuantStudio™ 3D Digital PCR UV Sealing Kit with Pen provides the materials needed to ensure an occlusive seal on the QuantStudio™ 3D Digital PCR Chip following reagent addition. This is accomplished through the application of sealant and the use of UV light to cure the sealant. This kit includes a syringe of sealant and a sealant tip, as well as a UV pen (batteries included) and pen holder. After loading sample onto the chip, apply the chip lid, add immersion fluid, and seal the fill-hole with the UV sealant and cure the sealant with the UV light pen. If you already have a UV pen and would...
Size: 1 kit
The Applied Biosystems® QuantStudio™ 3D Digital PCR Chip Lids and Blades are needed to securely cover and seal the QuantStudio™ 3D Digital PCR Chip after reagent addition. Simply load the reaction mix onto the chip using a blade, cover the chip with a chip lid, and seal the chip. The chip is then ready for amplification and analysis.
Size: 12 each
The Applied Biosystems® QuantStudio™ 3D Digital PCR Tilt Base for GeneAmp® PCR System 9700 sits beneath the GeneAmp® 9700 thermal cycler and ensures consistent performance during the PCR amplification of the QuantStudio™ 3D Digital PCR Chips. Simply place the Tilt Base beneath the feet of the thermal cycler, load your prepared 3D digital PCR chips, and begin PCR amplification.
Size: 1 base
• The Heat Equalizing Block is an aluminum conduction plate for use with the SSP UniTray and other laboratory procedures that require even heat distribution during thermal cycling. The Heat Equalizing Block is set on top of the SSP UniTray while thermal cycling to ensure even heat distribution • The Membrane Comb Loading Tray is for convenient benchtop loading of 64-lane membrane combs. Polycarbonate tray with two rows of 64 wells, each 2 mm wide • HLA Beyond Tears - By Glenn E. Rodey, Second Edition (De Novo, Inc., Durango, CO 2000) Serves as an introductory text for individuals who are inter...
Size: 1 each